Easy-to-manage, high-torque chainsaw for improved performance and user comfort when harvesting wood or cutting firewood. High torque over a wide range of speeds. Up to 20% less fuel consumption and up to 50% lower emissions compared with the previous model without 2-MIX technology.
GST OFF. Price Now $1387. Contact your local STIHL SHOP or STIHL Stockist for details. Offer valid until 30 November 2020.
MS 391 x 20"$1,595.00*
* Manufacturers recommended retail pricing. Prices reflect current recommended retail pricing and may be a promotional price. These prices are subject to change without notice. For more information about current promotions, please visit our Current Promotions page by clicking here.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Stockist for further information.
|Power output kW||3,3|
|Power-to-weight ratio kg/kW||1,9|
|Weight kg 1)||6,2|
|Recommended guide bar length cm/inch 50/20||20|
|Recommended guide bar length cm/inch||50/20|
|STIHL Oilomatic saw chain pitch||3/8 "|
1) Without fuel, without bar and chain
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result: lower consumption and high torque across a broad rpm range.
Pre-separation air filtration system
The innovative long-life air filter system greatly extends the service life of the filter. Air routing removes larger particles of dirt, meaning the actual filter has less to do. So the saw can be used for longer without having to clean the filter.
STIHL anti-vibration system
Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles.
Tool free fuel caps
Special caps on the fuel and oil tanks are designed for easy opening and locking without the need for tools.
The decompression valve is part of the easy start-system. The valve should be pressed before starting in order to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic, meaning that it must be pressed manually before starting, but then closes automatically.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption up to 50%.
Side-mounted chain tensioning
The tensioning screw is located on the side of the chainsaw through the sprocket cover. Chain side tensioning allows the saw chain to be retensioned effortlessly, avoiding any contact with the sharp chain.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Controlled-delivery oil pump
Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the users joints and muscles through a spring or rubber element in the starter handle.
We present some Product Technology features in product technology .
- Fits MS 170 to MS 461 from $76.50*
Practical, multi-functional quality tool with both a 3.5mm flat-blade screwdriver (for carburettor adjustments and cleaning grooves) and a 7.0mm slotted screwdriver. TX 27 Torx blade and 19-13 and 19-16 spark plug wrenches. Not suitable for use with, MS 150 T and MS 201 T.
- Multi function tool from $72.00*
Owners manuals and safety brochures